PART |
Description |
Maker |
ADP1190 |
Integrated 500<font style="text-transform: lowercase">mA Load Switch with Quad Signal Switch
|
Analog Devices
|
FDC6331L |
Integrated Load Switch
|
http:// FAIRCHILD[Fairchild Semiconductor]
|
SI3861DV SI3861 |
Integrated Load Switch
|
http:// FAIRCHILD[Fairchild Semiconductor]
|
SI3861DV |
Load Switch with Integrated Level-Shift
|
Vishay
|
NCP4545 |
NCP4545 Datasheet - ecoSWITCH™ Advanced Load Management: 10.5A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-6V, Adj. Slew Rate, Adj. Discharge, Adj. Turn-On Delay
|
ON Semiconductor
|
NCP45540 |
NCP45540 Datasheet - ecoSWITCH™ Advanced Load Management: 18 A Controlled Load Switch with Low R<sub>ON</sub>
|
ON Semiconductor
|
MAX1662 MAX1663 MAX1661-MAX1663 MAX1661 MAX1661EUB |
TRIPLE MOSFET DRIVER|BICMOS|TSSOP|10PIN|PLASTIC SWITCHING CONTROLLER, PDSO10 Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers with SMBus Interface Serial to Parallel Parallel to Serial Converters and Load Switch Controllers with SMBus Interface Serial-parallel/parallel-to-serial converter and load-switch controller with SMBus interface
|
Maxim Integrated Products, Inc. MAXIM[Maxim Integrated Products] Maixm MAXIM - Dallas Semiconductor
|
SLG59H1007V |
A 22 V, 13.3 mΩ, 5 A Integrated Power Switch with VIN Lockout Select and Load Power Monitor Output
|
Dialog Semiconductor
|
MAX4837 MAX4836 MAX4836-MAX4837 MAX4837EUT MAX4837 |
3.3 V, reset timeout: 1800 ms, 500 mA LDO linear regulator with current-limiting switch 3.3 V, reset timeout: 225 ms, 500 mA LDO linear regulator with current-limiting switch 3.3 V, reset timeout: 30 ms, 500 mA LDO linear regulator with current-limiting switch 3.3 V, reset timeout: 3.75 ms, 500 mA LDO linear regulator with current-limiting switch 3.3 V, 500 mA LDO linear regulator with current-limiting switch 500mA LDO Linear Regulators with Current-Limiting Switch From old datasheet system
|
MAXIM - Dallas Semiconductor Maxim Integrated Products
|
LMN200B021 LMN200B02 |
200 mA LOAD SWITCH PRE-BIASED PNP TRANSISTOR AND N-MOSFET WITH GATE PULL DOWN RESISTOR 200 mA LOAD SWITCH FEATURING PRE-BIASED PNP TRANSISTOR AND N-MOSFET 200 mA LOAD SWITCH FEATURING PRE-BIASED PNP TRANSISTOR AND N-MOSFET
|
Diodes Incorporated
|
WD101 WD105 WD200 WD102 WD506 WD100 WD103 WD104 WD |
DC/DC Converters DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load). DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load). DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load). DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load). DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load). DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load). DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load). DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load). DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load). DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load). DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
|
List of Unclassifed Man... International Power Sources ETC[ETC] List of Unclassifed Manufacturers
|
|